User's Manual

Chapter 21 Logs
NBG-460N User’s Guide
275
Time initialized by Time
server
The router got the time and date from the time
server.
Time initialized by NTP
server
The router got the time and date from the NTP server.
Connect to Daytime server
fail
The router was not able to connect to the Daytime
server.
Connect to Time server fail The router was not able to connect to the Time
server.
Connect to NTP server fail The router was not able to connect to the NTP server.
Too large ICMP packet has
been dropped
The router dropped an ICMP packet that was too
large.
Configuration Change: PC =
0x%x, Task ID = 0x%x
The router is saving configuration changes.
Successful SSH login Someone has logged on to the router’s SSH server.
SSH login failed Someone has failed to log on to the router’s SSH
server.
Successful HTTPS login Someone has logged on to the router's Web
Configurator interface using HTTPS protocol.
HTTPS login failed Someone has failed to log on to the router's Web
Configurator interface using HTTPS protocol.
Table 93 System Error Logs
LOG MESSAGE DESCRIPTION
%s exceeds the max.
number of session per
host!
This attempt to create a NAT session exceeds the
maximum number of NAT session table entries allowed to
be created per host.
setNetBIOSFilter: calloc
error
The router failed to allocate memory for the NetBIOS
filter settings.
readNetBIOSFilter: calloc
error
The router failed to allocate memory for the NetBIOS
filter settings.
WAN connection is down. A WAN connection is down. You cannot access the
network through this interface.
Table 92 System Maintenance Logs (continued)
LOG MESSAGE DESCRIPTION