User's Manual

Chapter 21 Logs
NBG-460N User’s Guide
286
Local User Database does not
support authentication method.
A user tried to use an authentication method that
the local user database does not support (it only
supports EAP-MD5).
No response from RADIUS. Pls
check RADIUS Server.
There is no response message from the RADIUS
server, please check the RADIUS server.
Use Local User Database to
authenticate user.
The local user database is operating as the
authentication server.
Use RADIUS to authenticate user. The RADIUS server is operating as the
authentication server.
No Server to authenticate user. There is no authentication server to authenticate
a user.
Local User Database does not
find user`s credential.
A user was not authenticated by the local user
database because the user is not listed in the
local user database.
Table 107 ACL Setting Notes
PACKET
DIRECTION
DIRECTION DESCRIPTION
(L to W) LAN to WAN ACL set for packets traveling from the LAN to the
WAN.
(W to L) WAN to LAN ACL set for packets traveling from the WAN to the
LAN.
(L to L/P) LAN to LAN/
NBG-460N
ACL set for packets traveling from the LAN to the
LAN or the NBG-460N.
(W to W/P) WAN to WAN/
NBG-460N
ACL set for packets traveling from the WAN to the
WAN or the NBG-460N.
Table 108 ICMP Notes
TYPE CODE DESCRIPTION
0 Echo Reply
0 Echo reply message
3 Destination Unreachable
0 Net unreachable
1 Host unreachable
2 Protocol unreachable
3 Port unreachable
4 A packet that needed fragmentation was dropped because it was set
to Don't Fragment (DF)
5 Source route failed
4 Source Quench
Table 106 802.1X Logs (continued)
LOG MESSAGE DESCRIPTION