User's Manual

Chapter 22 Tools
NBG-460N User’s Guide
293
Note: Do not turn off the NBG-460N while configuration file upload is in progress
After you see a “configuration upload successful” screen, you must then wait one
minute before logging into the NBG-460N again.
Figure 176 Configuration Restore Successful
The NBG-460N automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 177 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default NBG-
460N IP address (192.168.1.1). See Appendix C on page 339 for details on how to
set up your computer’s IP address.
Browse... Click Browse... to find the file you want to upload. Remember that you
must decompress compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.
Table 112 Maintenance Restore Configuration
LABEL DESCRIPTION