User's Manual

NBG-460N User’s Guide
305
CHAPTER 26
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• NBG-460N Access and Login
• Internet Access
• Resetting the NBG-460N to Its Factory Defaults
• Wireless Router/AP Troubleshooting
• Advanced Features
26.1 Power, Hardware Connections, and LEDs
The NBG-460N does not turn on. None of the LEDs turn on.
1 Make sure you are using the power adaptor or cord included with the NBG-460N.
2 Make sure the power adaptor or cord is connected to the NBG-460N and plugged
in to an appropriate power source. Make sure the power source is turned on.
3 Disconnect and re-connect the power adaptor or cord to the NBG-460N.
4 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.6 on
page 30.