User's Manual

Chapter 3 Introducing the Web Configurator
NBG-460N User’s Guide
41
3.5.1 Navigation Panel
Use the sub-menus on the navigation panel to configure NBG-460N features.
The following table describes the sub-menus.
Table 5 Screens Summary
LINK TAB FUNCTION
Status This screen shows the NBG-460N’s general device, system
and interface status information. Use this screen to access
the wizard, and summary statistics tables.
Network
Wireless
LAN
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG-460N to
block access to devices or block the devices from
accessing the NBG-460N.
Advanced This screen allows you to configure advanced wireless
settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of
Service (WMM QoS). WMM QoS allows you to prioritize
wireless traffic according to the delivery requirements of
individual services.
WPS Use this screen to configure WPS.
WPS
Station
Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is
enabled.
WDS Use this screen to set up Wireless Distribution System
(WDS) on your NBG-460N.
WAN Internet
Connection
This screen allows you to configure ISP parameters, WAN
IP address assignment, DNS servers and the WAN MAC
address.
Advanced Use this screen to configure other advanced properties.
LAN IP Use this screen to configure LAN IP address and subnet
mask.
IP Alias Use this screen to partition your LAN interface into
subnets.
Advanced Use this screen to enable other advanced properties.
DHCP
Server
General Use this screen to enable the NBG-460N’s DHCP server.
Advanced Use this screen to assign IP addresses to specific
individual computers based on their MAC addresses and to
have DNS servers assigned by the DHCP server.
Client List Use this screen to view current DHCP client information
and to always assign an IP address to a MAC address (and
host name).