User's Manual

Chapter 4 Connection Wizard
NBG-460N User’s Guide
63
advisable to clone the MAC address from a computer on your LAN even if your ISP
does not presently require MAC address authentication.
Figure 32 Wizard Step 3: WAN MAC Address
The following table describes the fields in this screen.
4.5 Connection Wizard: STEP 4: Bandwidth
management
Bandwidth management allows you to control the amount of bandwidth going out
through the NBG-460N’s WAN, LAN or WLAN port and prioritize the distribution of
Table 21 Wizard Step 3: WAN MAC Address
LABEL DESCRIPTION
Factory Default Select Factory Default to use the factory assigned default MAC
address.
Clone the
computer’s MAC
address
Select this option and enter the IP address of the computer on the
LAN whose MAC you are cloning. It is advisable to clone the MAC
address from a computer on your LAN even if your ISP does not
presently require MAC address authentication.
Set WAN MAC
Address
Select this option and enter the MAC address you want to use.
Back Click Back to return to the previous screen.
Next Click Next to continue.
Exit Click Exit to close the wizard screen without saving.