User's Manual

Chapter 5 Tutorials
NBG-460N User’s Guide
77
5.3 Site-To-Site VPN Tunnel Tutorial
Bob and Jack want to setup a VPN connection between their offices. Bob and Jack
each have a NBG-460N router and a static WAN IP address. This tutorial covers
how to configure their NBG-460Ns to create a secure connection.
Figure 48 Site-To-Site VPN Tunnel
The following table describes the VPN settings that must be configured on Bob and
Jack’s NBG-460N routers.
Table 23 Site-To-Site VPN Tunnel Settings
SETTING BOB’S NBG-460N JACK’S NBG-460N
Active YES YES
IPSec Keying
Mode
IKE IKE
Local Address 192.168.1.35 10.0.0.7
Local Address
End /Mask
192.168.1.35 10.0.0.7
Remote Address 10.0.0.7 192.168.1.35
Remote Address
End /Mask
10.0.0.7 192.168.1.35
My IP Address 1.1.1.1 2.2.2.2
Local ID Type IP IP
Local Content 1.1.1.1 2.2.2.2
Secure Gateway
Address
2.2.2.2 1.1.1.1
Peer ID Type IP IP
Peer Content 2.2.2.2 1.1.1.1
Encapsulation
Mode
Tunnel Tunnel
IPSec Protocol ESP ESP
Pre-Shared Key ThisIsMySecretKey ThisIsMySecretKey
Encryption
Algorithm
3DES 3DES
Authentication
Algorithm
SHA1 SHA1
192.168.1.35
10.0.0.7
BOB
JACK
1.1.1.1
2.2.2.2