User's Manual

Chapter 6 AP Mode

NBG-460N User’s Guide

• See Maintenance and Troubleshooting (261) for information on the configuring

your Maintenance settings.

6.5 Logging in to the Web Configurator in AP

Mode

1 Connect your computer to the LAN port of the NBG-460N.

2 The default IP address if the NBG-460N is “192.168.1.1”. In this case, your

computer must have an IP address in the range between “192.168.1.2” and

“192.168.1.255”.

3 Click Start > Run on your computer in Windows.

4 Type “cmd” in the dialog box.

5 Type “ipconfig” to show your computer’s IP address. If your computer’s IP address

is not in the correct range then see Appendix C on page 339 for information on

changing your computer’s IP address.

6 After you’ve set your computer’s IP address, open a web browser such as Internet

Explorer and type “192.168.1.1” as the web address in your web browser.

See Chapter 5 on page 67 for a tutorial on setting up a network with an AP.