ZyXEL G-220 v2 802.11g Wireless USB Adapter User’s Guide Version 1.
ZyXEL G-220 v2 User’s Guide Copyright Copyright © 2006 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation.
ZyXEL G-220 v2 User’s Guide Federal Communications Commission (FCC) Interference Statement The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operations. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
ZyXEL G-220 v2 User’s Guide Certifications 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page.
ZyXEL G-220 v2 User’s Guide ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase.
ZyXEL G-220 v2 User’s Guide Customer Support Please have the following information ready when you contact customer support. • • • • Product model and serial number. Warranty Information. Date that you received your device. Brief description of the problem and the steps you took to solve it. METHOD SUPPORT E-MAIL TELEPHONEA WEB SITE FAX FTP SITE REGULAR MAIL LOCATION CORPORATE HEADQUARTERS (WORLDWIDE) CZECH REPUBLIC DENMARK FINLAND SALES E-MAIL support@zyxel.com.tw +886-3-578-3942 sales@zyxel.
ZyXEL G-220 v2 User’s Guide TELEPHONEA WEB SITE SALES E-MAIL FAX FTP SITE info@pl.zyxel.com +48-22-5286603 www.pl.zyxel.com ZyXEL Communications ul.Emilli Plater 53 00-113 Warszawa Poland www.zyxel.ru ZyXEL Russia Ostrovityanova 37a Str. Moscow, 117279 Russia www.zyxel.es ZyXEL Communications Alejandro Villegas 33 1º, 28043 Madrid Spain www.zyxel.se ZyXEL Communications A/S Sjöporten 4, 41764 Göteborg Sweden www.ua.zyxel.com ZyXEL Ukraine 13, Pimonenko Str.
ZyXEL G-220 v2 User’s Guide Table of Contents Copyright .................................................................................................................. 3 Federal Communications Commission (FCC) Interference Statement ............... 4 ZyXEL Limited Warranty.......................................................................................... 6 Customer Support.................................................................................................... 7 Table of Contents .....
ZyXEL G-220 v2 User’s Guide 2.2.2 IEEE 802.1x ..............................................................................................28 2.2.2.1 EAP Authentication .........................................................................28 2.2.3 WPA(2) .....................................................................................................29 2.2.3.1 Encryption ......................................................................................29 2.2.3.2 User Authentication .............
ZyXEL G-220 v2 User’s Guide Chapter 5 Maintenance ........................................................................................................... 59 5.1 The About Screen .............................................................................................59 5.2 Uninstalling the ZyXEL Utility ............................................................................59 5.3 Upgrading the ZyXEL Utility ..............................................................................
ZyXEL G-220 v2 User’s Guide 12 Table of Contents
ZyXEL G-220 v2 User’s Guide List of Figures Figure 1 Application: Infrastructure ....................................................................... 20 Figure 2 Application: Ad-Hoc ................................................................................ 20 Figure 3 Application: Access Point Mode .............................................................. 21 Figure 4 ZyXEL Utility: System Tray Icon ..............................................................
ZyXEL G-220 v2 User’s Guide Figure 39 Windows 2000: Local Network .............................................................. 69 Figure 40 Windows XP: System Tray Icon ............................................................. 71 Figure 41 Windows XP SP1: Wireless Network Connection .................................. 72 Figure 42 Windows XP SP2: Wireless Network Connection .................................. 72 Figure 43 Windows XP SP1: Wireless Network Connection Properties ................
ZyXEL G-220 v2 User’s Guide List of Tables Table 1 ZyXEL Utility: System Tray Icon ............................................................... 22 Table 2 ZyXEL Utility: Menu Screen Summary ..................................................... 26 Table 3 Station Mode: Link Info ............................................................................. 36 Table 4 Station Mode: Link Info: Trend Chart ........................................................ 37 Table 5 Station Mode: Site Survey .........
ZyXEL G-220 v2 User’s Guide 16 List of Tables
ZyXEL G-220 v2 User’s Guide Preface Congratulations on your purchase of the ZyXEL G-220 v2 802.11g Wireless USB Adapter. Your ZyXEL G-220 v2 is easy to install and configure. About This User's Guide This manual is designed to guide you through the configuration of your ZyXEL G-220 v2 for its various applications. Related Documentation • Supporting Disk Refer to the included CD for support documents. • Quick Start Guide The Quick Start Guide is designed to help you get up and running right away.
ZyXEL G-220 v2 User’s Guide Graphics Icons Key Wireless Access Point Computer Notebook Computer Server Modem Wireless Signal Telephone Switch Router Internet Cloud 18 Preface
ZyXEL G-220 v2 User’s Guide CHAPTER 1 Getting Started This chapter introduces the ZyXEL G-220 v2 and prepares you to use the ZyXEL Utility. 1.1 About Your ZyXEL G-220 v2 The ZyXEL G-220 v2 is an IEEE 802.11g compliant wireless LAN adapter. The following lists the main features of your ZyXEL G-220 v2. See the product specifications in the appendix for detailed features. • Automatic rate selection. • Security: WEP (Wired Equivalent Privacy), IEEE 802.
ZyXEL G-220 v2 User’s Guide Figure 1 Application: Infrastructure 1.1.1.2 Ad-Hoc In case you prefer to set up a small independent wireless workgroup without an AP, use the Ad-Hoc mode. Ad-hoc mode does not require an AP or a wired network. Two or more wireless clients communicate directly to each other.
ZyXEL G-220 v2 User’s Guide 1.1.1.3 Access Point Mode You can set the ZyXEL G-220 v2 in access point mode. The following figure shows a network example. Figure 3 Application: Access Point Mode In the example, the ZyXEL G-220 v2 is installed on computer A and set to operate in access point mode. Computer A shares Internet connection to the wireless LAN, so wireless stations B and C can access the Internet. 1.
ZyXEL G-220 v2 User’s Guide 1.5 Accessing the ZyXEL Utility After you install and start the ZyXEL Utility, an icon for the ZyXEL Utility appears in the system tray. Note: When the ZyXEL Utility system tray icon displays, the ZyXEL G-220 v2 is installed properly. When you use the ZyXEL Utility, it automatically disables the Windows XP wireless configuration tool. Figure 4 ZyXEL Utility: System Tray Icon The color of the ZyXEL Utility system tray icon indicates the status of the ZyXEL G-220 v2.
ZyXEL G-220 v2 User’s Guide 1.6.1 Site Survey After you install the ZyXEL Utility and then insert the ZyXEL G-220 v2, follow the steps below to connect to a network using the Site Survey screen. 1 Make sure a wireless network is available and within range. 2 Open the ZyXEL Utility and click the Site Survey tab to open the screen as shown next. 3 Click Scan to search for available wireless networks.
ZyXEL G-220 v2 User’s Guide Figure 6 ZyXEL Utility: Security Setting 6 Verify that you have successfully connected to the selected network and check the network information in the Link Info screen. If the ZyXEL G-220 v2 is not connected to a network, the fields in this screen are blank. Figure 7 ZyXEL Utility: Link Info 1.7 ZyXEL G-220 v2 Modes You can set your ZyXEL G-220 v2 to operate in either wireless station or access point (AP) modes.
ZyXEL G-220 v2 User’s Guide In access point mode, your ZyXEL G-220 v2 functions as an access point. This allows you to set up your wireless network without using a dedicated AP device. Up to 16 wireless stations can associate to the ZyXEL G-220 v2 to form a wireless network. Refer to Section 1.7.1 on page 25 and Chapter 4 on page 53 for more information. Note: With WZC, you cannot use the ZyXEL G-220 v2 as an access point. 1.7.
ZyXEL G-220 v2 User’s Guide Figure 9 Menu Summary: Station Mode Figure 10 Menu Summary: AP Mode The following table describes the menus. Table 2 ZyXEL Utility: Menu Screen Summary TAB DESCRIPTION Station Mode Link Info Use this screen to see your current connection status, configuration and data rate statistics. Site Survey Use this screen to • scan for a wireless network • configure wireless security (if activated on the selected network). • connect to a wireless network.
ZyXEL G-220 v2 User’s Guide CHAPTER 2 Wireless LAN Network This chapter provides background information on wireless LAN network. 2.1 Wireless LAN Overview This section describes the wireless LAN network terms and applications. 2.1.1 SSID The SSID (Service Set Identity) is a unique name shared among all wireless devices in a wireless network. Wireless devices must have the same SSID to communicate with each other. 2.1.2 Channel A radio frequency used by a wireless device is called a channel. 2.1.
ZyXEL G-220 v2 User’s Guide Configure the wireless LAN security using the Configuration or the Profile Security Setting screen. If you do not enable any wireless security on your ZyXEL G-220 v2, the ZyXEL G220 v2’s wireless communications are accessible to any wireless networking device that is in the coverage area. 2.2.
ZyXEL G-220 v2 User’s Guide 2.2.3 WPA(2) Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i standard. WPA2 (IEEE 802.11i) is a wireless security standard that defines stronger encryption, authentication and key management than WPA. Key differences between WPA(2) and WEP are improved data encryption and user authentication. If both an AP and the wireless clients support WPA2 and you have an external RADIUS server, use WPA2 for stronger data encryption.
ZyXEL G-220 v2 User’s Guide 1 First enter identical passwords into the AP and all wireless clients. The Pre-Shared Key (PSK) must consist of between 8 and 63 ASCII characters or 64 hexadecimal characters (including spaces and symbols). 2 The AP checks each client's password and (only) allows it to join the network if it matches its password. 3 The AP and wireless clients use the pre-shared key to generate a common PMK.
ZyXEL G-220 v2 User’s Guide Figure 12 WPA(2) with RADIUS Application Example 2.3 Encryption Type The IEEE 802.11b/g standard describes a simple encryption method between the wireless stations and AP. Three encryption types are defined: Auto, Open System and Shared Key. • Open System mode is implemented for ease-of-use and when security is not an issue. The wireless station and the AP do not share a secret key.
ZyXEL G-220 v2 User’s Guide Select Auto to have the ZyXEL G-220 v2 automatically use short preamble when all access point/wireless stations support it, otherwise the ZyXEL G-220 v2 uses long preamble. Note: The ZyXEL G-220 v2 and the access point/wireless stations MUST use the same preamble mode in order to communicate. 2.
ZyXEL G-220 v2 User’s Guide 2.5.1.2 Wireless Client Start the ZyXEL Utility and click the Adapter tab. Select the OTIST check box, enter the same Setup Key as your AP’s and click Save. 2.5.2 Starting OTIST Note: You must click Start in the AP OTIST web configurator screen and in the wireless client(s) Adapter screen all within three minutes (at the time of writing). You can start OTIST in the wireless clients and AP in any order but they must all be within range and have OTIST enabled.
ZyXEL G-220 v2 User’s Guide See the user’s guide for more information. 1 In the AP, a web configurator screen pops up showing you the security settings to transfer. After reviewing the settings, click OK. 2 This screen appears while OTIST settings are being transferred. It closes when the transfer is complete. • In the wireless client, you see this screen if it can't find an OTIST-enabled AP (with the same Setup key). Click OK to go back to the ZyXEL utility main screen.
ZyXEL G-220 v2 User’s Guide CHAPTER 3 Wireless Station Mode Configuration This chapter shows you how to configure your ZyXEL G-220 v2 in wireless station mode. 3.1 Wireless Station Mode Overview To set your ZyXEL G-220 v2 in wireless station mode, refer to Section 1.7.1 on page 25. 3.2 The Link Info Screen When the ZyXEL Utility starts, the Link Info screen displays, showing the current configuration and connection status of your ZyXEL G-220 v2.
ZyXEL G-220 v2 User’s Guide The following table describes the labels in this screen. Table 3 Station Mode: Link Info LABEL DESCRIPTION AP Mode Station Mode Use the radio button to set the ZyXEL G-220 v2 to operate in wireless station or access point mode. Refer to Section 1.7.1 on page 25 for more information. Wireless Network Status Profile Name This is the name of the profile you are currently using. Network Name (SSID) The SSID identifies the Service Set to which a wireless station is associated.
ZyXEL G-220 v2 User’s Guide Figure 14 Station Mode: Link Info: Trend Chart The following table describes the labels in this screen. Table 4 Station Mode: Link Info: Trend Chart LABEL DESCRIPTION Transmit This field displays the current data transmission rate in kilobits per second (Kbps). Receive This field displays the current data receiving rate in kilobits per second (Kbps). 3.3 The Site Survey Screen Use the Site Survey screen to scan for and connect to a wireless network automatically.
ZyXEL G-220 v2 User’s Guide The following table describes the labels in this screen. Table 5 Station Mode: Site Survey LABEL DESCRIPTION Available Network List Click a column heading to sort the entries. , , or denotes that the wireless device is in infrastructure mode and the wireless security is activated. denotes that the wireless device is in infrastructure mode but the wireless security is deactivated. denotes that the wireless device is in Ad-Hoc mode and the wireless security is activated.
ZyXEL G-220 v2 User’s Guide 3.3.2 Security Settings When you configure the ZyXEL G-220 v2 to connect to a network with wireless security activated and the security settings are disabled on the ZyXEL G-220 v2, the screen varies according to the encryption method used by the selected network. 3.3.2.1 WEP Encryption Figure 16 Station Mode: Security Settings: WEP The following table describes the labels in this screen.
ZyXEL G-220 v2 User’s Guide Table 6 Station Mode: Security Settings: WEP (continued) LABEL DESCRIPTION Key x (where x is a Select this option if you want to manually enter the WEP keys. Enter the WEP key number between 1 in the field provided. and 4) If you select 64 Bits in the WEP field. Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for example, 11AA22BB33) for HEX key type.
ZyXEL G-220 v2 User’s Guide The following table describes the labels in this screen. Table 7 Station Mode: Security Settings: WPA-PSK/WPA2-PSK LABEL DESCRIPTION Encryption Type The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses a simple common password, instead of user-specific credentials. Select the encryption type (TKIP or AES) for data encryption. Refer to Section 2.2.3 on page 29 for more information.
ZyXEL G-220 v2 User’s Guide Table 8 Station Mode: Security Settings: WPA/WPA2 LABEL DESCRIPTION Password This field is not available when you select TLS in the Authentication Type field. Enter the password associated with the user name above. Certificate This field is only available when you select TLS in the Authentication Type field. Select a certificate from the drop-down list box.
ZyXEL G-220 v2 User’s Guide Table 9 Station Mode: Security Settings: 802.1x LABEL DESCRIPTION Password This field is not available when you select TLS in the Authentication Type field. Enter the password associated with the user name above. Certificate This field is only available when you select TLS in the Authentication Type field. Select a certificate from the drop-down list box.
ZyXEL G-220 v2 User’s Guide The following table describes the labels in this screen. Table 10 Confirm Save Screen LABEL DESCRIPTION Security Setting Network Name This field displays the SSID previously entered. Network Type This field displays the network type (Infrastructure or Ad Hoc) of the wireless device. Channel This field displays the channel number used by the profile. Security This field shows whether data encryption is activated (WEP, WPA, WPA2, WPAPSK, WPA2-PSK or 802.
ZyXEL G-220 v2 User’s Guide Figure 21 Station Mode: Profile The following table describes the labels in this screen. Table 11 Station Mode: Profile LABEL DESCRIPTION Profile List Click a column heading to sort the entries. , , or denotes that the wireless device is in infrastructure mode and the wireless security is activated. denotes that the wireless device is in infrastructure mode but the wireless security is deactivated.
ZyXEL G-220 v2 User’s Guide Table 11 Station Mode: Profile (continued) LABEL DESCRIPTION Security This field shows whether data encryption is activated (WEP (WEP or 802.1x), WPA, WPA-PSK, WPA2, WPA2-PSK) or inactive (DISABLE). Transmission Rate This field displays the transmission speed of the selected profile in megabits per second (Mbps). 3.4.1 Adding a New Profile Follow the steps below to add a new profile. 1 Click Add in the Profile screen. An Add New Profile screen displays as shown next.
ZyXEL G-220 v2 User’s Guide Table 12 Station Mode: Profile: Add a New Profile (continued) LABEL DESCRIPTION Exit Click Exit to go back to the previous screen without saving. Scan Info This table displays the information of the available wireless networks within the transmission range. , , or denotes that the wireless device is in infrastructure mode and the wireless security is activated. denotes that the wireless device is in infrastructure mode but the wireless security is deactivated.
ZyXEL G-220 v2 User’s Guide The following table describes the labels in this screen. Table 13 Station Mode: Profile: Select a Channel LABEL DESCRIPTION Wireless Settings Channel Select a channel number from the drop-down list box. To associate to an ad-hoc network, you must use the same channel as the peer computer. 3 If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data encryption.
ZyXEL G-220 v2 User’s Guide Figure 25 Station Mode: Profile: Security Settings 5 This read-only screen shows a summary of the new profile settings. Verify that the settings are correct. Click Save to save and go to the next screen. Click Back to return to the previous screen. Otherwise, click Exit to go back to the Profile screen without saving. Figure 26 Station Mode: Profile: Confirm New Settings 6 To use this network profile, click the Activate Now button. Otherwise, click the Activate Later button.
ZyXEL G-220 v2 User’s Guide Figure 27 Station Mode: Profile: Activate the Profile 3.5 The Adapter Screen To set the advanced features on the ZyXEL G-220 v2, click the Adapter tab. Figure 28 Station Mode: Adapter The following table describes the labels in this screen. Table 14 Station Mode: Adapter LABEL DESCRIPTION Adapter Setting Transmission Rate Select a transmission speed from the drop-down list box. Choose from Fully Auto (default), 1 Mbps, 2 Mbps, 5.
ZyXEL G-220 v2 User’s Guide Table 14 Station Mode: Adapter (continued) LABEL DESCRIPTION Power Saving Mode Select Maximum Power Save or Fast Power Save to save power (especially for notebook computers). This forces the ZyXEL G-220 v2 to go to sleep mode when it is not transmitting data. When you select Continuous Access Mode, the ZyXEL G-220 v2 will never go to sleep mode. OTIST (OneTouch Intelligent Security Technology) Select this check box to enable OTIST.
ZyXEL G-220 v2 User’s Guide 52 Chapter 3 Wireless Station Mode Configuration
ZyXEL G-220 v2 User’s Guide CHAPTER 4 Access Point Mode Configuration This chapter shows you how to configure your ZyXEL G-220 v2 in access point mode. 4.1 Access Point Mode Introduction To set your ZyXEL G-220 v2 as an Access Point (AP), refer to Section 1.7.1 on page 25. In access point mode, your ZyXEL G-220 v2 functions as an access point. This allows you to set up your wireless networks without using a dedicated AP device. Up to 16 wireless stations can associate to the ZyXEL G-220 v2. 4.1.
ZyXEL G-220 v2 User’s Guide Figure 29 Access Point Mode: Link Info The following table describes the labels in this screen. Table 15 Access Point Mode: Link Info LABEL DESCRIPTION Status SSID This field displays the name that identifies your ZyXEL G-220 v2 in the wireless LAN network. Current Channel This field displays the radio channel the ZyXEL G-220 v2 is currently using. Transmission Rate This field displays the current transmission rate of the ZyXEL G-220 v2 in megabits per second (Mbps).
ZyXEL G-220 v2 User’s Guide Figure 30 Access Point Mode: Configuration The following table describes the labels in this screen. Table 16 Access Point Mode: Configuration LABEL DESCRIPTION Wireless Settings SSID The SSID identifies the service set to which a wireless station is associated. Wireless stations associating to the access point (the ZyXEL G-220 v2) must have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
ZyXEL G-220 v2 User’s Guide Table 16 Access Point Mode: Configuration (continued) LABEL DESCRIPTION WEP Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the related fields. Select Disable to deactivate the WEP encryption. Authentication Type Select an authentication method. Choices are Auto, Shared Key and Open System. Refer to Section 2.3 on page 31 for more information.
ZyXEL G-220 v2 User’s Guide 4.4 The MAC Filter Screen The MAC Filter screen allows you to configure the ZyXEL G-220 v2 to give exclusive access to (Accept) devices or exclude devices from (Reject) connecting to the ZyXEL G-220 v2. Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the device(s) to configure this screen.
ZyXEL G-220 v2 User’s Guide 58 Chapter 4 Access Point Mode Configuration
ZyXEL G-220 v2 User’s Guide CHAPTER 5 Maintenance This chapter describes how to uninstall or upgrade the ZyXEL Utility. 5.1 The About Screen The About screen displays related version numbers of the ZyXEL G-220 v2. To display the screen as shown below, click the about ( ) button. Figure 32 About The following table describes the read-only fields in this screen. Table 18 About LABEL DESCRIPTION Driver Version This field displays the version number of the ZyXEL G-220 v2 driver.
ZyXEL G-220 v2 User’s Guide Figure 33 Uninstall: Confirm 3 Click Finish to complete uninstalling the software and restart the computer when prompted. Figure 34 Uninstall: Finish 5.3 Upgrading the ZyXEL Utility Note: Before you uninstall the ZyXEL Utility, take note of the current network configuration. To perform the upgrade, follow the steps below. 1 Download the latest version of the utility from the ZyXEL web site and save the file on your computer. 2 Follow the steps in Section 5.
ZyXEL G-220 v2 User’s Guide 5 Double-click on the setup program for the new utility to start the ZyXEL Utility installation. 6 Insert the ZyXEL G-220 v2 and check the version numbers in the About screen to make sure the new utility is installed properly.
ZyXEL G-220 v2 User’s Guide 62 Chapter 5 Maintenance
ZyXEL G-220 v2 User’s Guide CHAPTER 6 Troubleshooting This chapter covers potential problems and the possible remedies. After each problem description, some instructions are provided to help you to diagnose and to solve the problem. 6.1 Problems Starting the ZyXEL Utility Program Table 19 Troubleshooting Starting ZyXEL Utility Program PROBLEM CORRECTIVE ACTION Cannot start the ZyXEL Wireless LAN Utility Make sure the ZyXEL G-220 v2 is properly inserted and the LED(s) is on.
ZyXEL G-220 v2 User’s Guide 6.3 Problem with the Link Status Table 21 Troubleshooting Link Quality PROBLEM CORRECTIVE ACTION The link quality and/or signal strength is poor all the time. Search and connect to another AP with a better link quality using the Site Survey screen. Move your computer closer to the AP or the peer computer(s) within the transmission range. There may be too much radio interference (for example microwave or another AP using the same channel) around your wireless network.
ZyXEL G-220 v2 User’s Guide APPENDIX A Product Specifications Table 23 Product Specifications PHYSICAL AND ENVIRONMENTAL Product Name ZyXEL G-220 v2 802.11g Wireless USB Adapter Interface USB 2.0 compatible Standards IEEE 802.11b IEEE 802.11g Network Architectures Infrastructure Ad-Hoc Operating Frequencies 2.412-2.484GHz Operating Channels IEEE 802.11b: 11 Channels (North America) IEEE 802.11g: 11 Channels (North America) IEEE 802.11b: 13 Channels (Europe) IEEE 802.
ZyXEL G-220 v2 User’s Guide Table 23 Product Specifications (continued) Modulation IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps (OFDM) IEEE 802.11b: 11, 5.5 Mbps (CCK), 2 Mbps (DQPSK), 1 Mbps (DBPSK) Output Power 17 dBm (typical) at 11Mbps CCK, QPSK, BPSK 15 dBm (typical) at 54Mbps OFDM RX Sensitivity IEEE 802.11g (OFDM): 54 Mbps: < -72 dBm IEEE 802.
ZyXEL G-220 v2 User’s Guide APPENDIX B Access Point Mode Setup Example This example uses the network sharing feature in Windows 2000 to bridge the wired and wireless network when you set the ZyXEL G-220 v2 in access point (AP) mode. Refer to Chapter 4, “Access Point Mode Configuration,” on page 53 for setup methods and requirements. Steps may vary depending on your Windows version. You may need to install additional software in Windows 98 Second Edition and Windows ME.
ZyXEL G-220 v2 User’s Guide Figure 36 Windows 2000: Network and Dial-up Connections 4 A Properties screen displays. Click the Sharing tab and select Enable Internet Connection Sharing for this connection. Click OK. Figure 37 Windows 2000: Network Properties If there is more than one network adapter on the computer, select Enable Internet Connection Sharing for this connection and select the network adapter to which you want to share network access.
ZyXEL G-220 v2 User’s Guide Figure 38 WIndows 2000: Network Properties: Select Network Adapter 5 A notice screen displays. Click Yes. Figure 39 Windows 2000: Local Network Configuring the Wireless Station Computer Refer to Appendix F, “Setting up Your Computer’s IP Address,” on page 95 for more information on how to set up the wireless station computer(s) IP address.
ZyXEL G-220 v2 User’s Guide 70 Appendix B Access Point Mode Setup Example
ZyXEL G-220 v2 User’s Guide APPENDIX C Disable Windows XP Wireless LAN Configuration Tool Windows XP includes a configuration tool (also known as Wireless Zero Configuration (WZC)) for wireless devices. Follow the steps below to disable the configuration tool in Windows XP after you install the ZyXEL Utility. The screen varies depending on the version of Windows XP service pack.
ZyXEL G-220 v2 User’s Guide Figure 41 Windows XP SP1: Wireless Network Connection Windows XP SP2: When a Wireless Network Connection window displays, click Change advanced settings under Related Tasks and then the Wireless Networks tab. Figure 42 Windows XP SP2: Wireless Network Connection 3 In the Wireless Network Connection Properties window, make sure the Use Windows to configure my wireless network settings check box is not selected. Click OK.
ZyXEL G-220 v2 User’s Guide Figure 43 Windows XP SP1: Wireless Network Connection Properties Figure 44 Windows XP SP2: Wireless Network Connection Properties Appendix C Disable Windows XP Wireless LAN Configuration Tool 73
ZyXEL G-220 v2 User’s Guide Via the Control Panel 1 If the icon for the wireless network connection is not in the system tray, click Start, Control Panel and double-click Network Connections. 2 Double-click on the icon for wireless network connection to display a status window as shown below. 3 Click Properties and click the Wireless Networks tab.
ZyXEL G-220 v2 User’s Guide 4 In the Wireless Network Connection Properties window, make sure the Use Windows to configure my wireless network settings check box is not selected. Click OK.
ZyXEL G-220 v2 User’s Guide 76 Appendix C Disable Windows XP Wireless LAN Configuration Tool
ZyXEL G-220 v2 User’s Guide APPENDIX D Management with Wireless Zero Configuration This appendix shows you how to manage your ZyXEL G-220 v2 using the Windows XP wireless zero configuration tool. Be sure you have the Windows XP service pack 2 installed on your computer. Otherwise, you should at least have the Windows XP service pack 1 already on your computer and download the support patch for WPA from the Microsoft web site. Windows XP SP2 screen shots are shown unless otherwise specified.
ZyXEL G-220 v2 User’s Guide Connecting to a Wireless Network 1 Double-click the network icon for wireless connections in the system tray to open the Wireless Network Connection Status screen. Figure 50 Windows XP SP2: System Tray Icon The type of the wireless network icon in Windows XP SP2 indicates the status of the ZyXEL G-220 v2. Refer to the following table for details. Table 24 Windows XP SP2: System Tray Icon ICON DESCRIPTION The ZyXEL G-220 v2 is connected to a wireless network.
ZyXEL G-220 v2 User’s Guide Windows XP SP1: In the Wireless Network Connection Status screen, click Properties and the Wireless Networks tab to open the Wireless Network Connection Properties screen. Figure 52 Windows XP SP1: Wireless Network Connection Status 3 Windows XP SP2: Click Refresh network list to reload and search for available wireless devices within transmission range. Select a wireless network in the list and click Connect to join the selected wireless network.
ZyXEL G-220 v2 User’s Guide The following table describes the icons in the wireless network list. Table 25 Windows XP SP2: Wireless Network Connection ICON DESCRIPTION This denotes that wireless security is activated for the wireless network. This denotes that this wireless network is your preferred network. Ordering your preferred networks is important because the ZyXEL G-220 v2 tries to associate to the preferred network first in the order that you specify.
ZyXEL G-220 v2 User’s Guide If there is no security activated for the selected wireless network, a warning screen appears. Click Connect Anyway if wireless security is not your concern.
ZyXEL G-220 v2 User’s Guide Association Select a network in the Preferred networks list and click Properties to view or configure security. Figure 57 Windows XP: Wireless (network) properties: Association The following table describes the labels in this screen. Table 27 Windows XP: Wireless (network) properties: Association 82 LABEL DESCRIPTION Network name (SSID) This field displays the SSID (Service Set IDentifier) of each wireless network.
ZyXEL G-220 v2 User’s Guide Table 27 Windows XP: Wireless (network) properties: Association (continued) LABEL DESCRIPTION If this check box is selected, you are connecting to another computer directly. This is a computer-tocomputer (ad hoc) network; wireless access points are not used OK Click OK to save your changes. Cancel Click Cancel to leave this screen without saving any changes you may have made.
ZyXEL G-220 v2 User’s Guide Table 28 Windows XP: Wireless (network) properties: Authentication (continued) LABEL DESCRIPTION Authenticate as computer when computer information is available Select this check box to have the computer send its information to the network for authentication when a user is not logged on.
ZyXEL G-220 v2 User’s Guide The following table describes the labels in this screen. Table 29 Windows XP: Protected EAP Properties LABEL DESCRIPTION Validate server certificate Select the check box to verify the certificate of the authentication server. Connect to these servers Select the check box and specify a domain in the field below to have your computer connect to a server which resides only within this domain.
ZyXEL G-220 v2 User’s Guide The following table describes the labels in this screen. Table 30 Windows XP: Smart Card or other Certificate Properties LABEL DESCRIPTION Use my smart card Select this check box to use the smart card for authentication. Use a certificate on this computer Select this check box to use a certificate on your computer for authentication. Validate server certificate Select the check box to check the certificate of the authentication server.
ZyXEL G-220 v2 User’s Guide Figure 61 Windows XP SP2: Wireless Networks: Preferred Networks Windows XP SP1: In the Wireless Network Connection Status screen, click Properties and the Wireless Networks tab to open the screen as shown. Figure 62 Windows XP SP1: Wireless Networks: Preferred Networks 2 Whenever the ZyXEL G-220 v2 tries to connect to a new network, the new network is added in the Preferred networks table automatically.
ZyXEL G-220 v2 User’s Guide 88 Appendix D Management with Wireless Zero Configuration
ZyXEL G-220 v2 User’s Guide APPENDIX E Types of EAP Authentication This appendix discusses some popular authentication types: EAP-MD5, EAP-TLS, EAPTTLS, PEAP and LEAP. The type of authentication you use depends on the RADIUS server or the AP. Consult your network administrator for more information. Your wireless LAN device may not support all authentication types. EAP-MD5 (Message-Digest Algorithm 5) MD5 authentication is the simplest one-way authentication method.
ZyXEL G-220 v2 User’s Guide PEAP (Protected EAP) Like EAP-TTLS, server-side certificate authentication is used to establish a secure connection, then use simple username and password methods through the secured connection to authenticate the clients, thus hiding client identity. However, PEAP only supports EAP methods, such as EAP-MD5, EAP-MSCHAPv2 and EAP-GTC (EAP-Generic Token Card), for client authentication. EAP-GTC is implemented only by Cisco.
ZyXEL G-220 v2 User’s Guide WPA(2) Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i standard. WPA2 (IEEE 802.11i) is a wireless security standard that defines stronger encryption, authentication and key management than WPA. Key differences between WPA(2) and WEP are improved data encryption and user authentication. If both an AP and the wireless clients support WPA2 and you have an external RADIUS server, use WPA2 for stronger data encryption.
ZyXEL G-220 v2 User’s Guide By generating unique data encryption keys for every data packet and by creating an integrity checking mechanism (MIC), with TKIP and AES it is more difficult to decrypt data on a Wi-Fi network than WEP and difficult for an intruder to break into the network. The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The only difference between the two is that WPA(2)-PSK uses a simple common password, instead of user-specific credentials.
ZyXEL G-220 v2 User’s Guide Figure 63 WPA-PSK Authentication WPA(2) with RADIUS Application Example You need the IP address of the RADIUS server, its port number (default is 1812), and the RADIUS shared secret. A WPA(2) application example with an external RADIUS server looks as follows. "A" is the RADIUS server. "DS" is the distribution system. 1 The AP passes the wireless client's authentication request to the RADIUS server.
ZyXEL G-220 v2 User’s Guide Security Parameters Summary Refer to this table to see what other security parameters you should configure for each Authentication Method/ key management protocol type. MAC address filters are not dependent on how you configure these security features. Table 32 Wireless Security Relational Matrix AUTHENTICATION ENCRYPTION ENTER METHOD/ KEY METHOD MANUAL KEY MANAGEMENT PROTOCOL IEEE 802.
ZyXEL G-220 v2 User’s Guide APPENDIX F Setting up Your Computer’s IP Address All computers must have a 10M or 100M Ethernet adapter card and TCP/IP installed. Windows 95/98/Me/NT/2000/XP, Macintosh OS 7 and later operating systems and all versions of UNIX/LINUX include the software components you need to install and use TCP/ IP on your computer. Windows 3.1 requires the purchase of a third-party TCP/IP application package.
ZyXEL G-220 v2 User’s Guide Figure 65 WIndows 95/98/Me: Network: Configuration Installing Components The Network window Configuration tab displays a list of installed components. You need a network adapter, the TCP/IP protocol and Client for Microsoft Networks. If you need the adapter: 1 In the Network window, click Add. 2 Select Adapter and then click Add. 3 Select the manufacturer and model of your network adapter and then click OK. If you need TCP/IP: 1 In the Network window, click Add.
ZyXEL G-220 v2 User’s Guide 3 Select Microsoft from the list of manufacturers. 4 Select Client for Microsoft Networks from the list of network clients and then click OK. 5 Restart your computer so the changes you made take effect. Configuring 1 In the Network window Configuration tab, select your network adapter's TCP/IP entry and click Properties 2 Click the IP Address tab. • • If your IP address is dynamic, select Obtain an IP address automatically.
ZyXEL G-220 v2 User’s Guide Figure 67 Windows 95/98/Me: TCP/IP Properties: DNS Configuration 4 Click the Gateway tab. • • If you do not know your gateway’s IP address, remove previously installed gateways. If you have a gateway IP address, type it in the New gateway field and click Add. 5 Click OK to save and close the TCP/IP Properties window. 6 Click OK to close the Network window. Insert the Windows CD if prompted. 7 Turn on your ZyXEL G-220 v2 and restart your computer when prompted.
ZyXEL G-220 v2 User’s Guide Figure 68 Windows XP: Start Menu 2 For Windows XP, click Network Connections. For Windows 2000/NT, click Network and Dial-up Connections. Figure 69 Windows XP: Control Panel 3 Right-click Local Area Connection and then click Properties.
ZyXEL G-220 v2 User’s Guide Figure 70 Windows XP: Control Panel: Network Connections: Properties 4 Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties. Figure 71 Windows XP: Local Area Connection Properties 5 The Internet Protocol TCP/IP Properties window opens (the General tab in Windows XP). • 100 If you have a dynamic IP address click Obtain an IP address automatically.
ZyXEL G-220 v2 User’s Guide • If you have a static IP address click Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields. Click Advanced. Figure 72 Windows XP: Advanced TCP/IP Settings 6 If you do not know your gateway's IP address, remove any previously installed gateways in the IP Settings tab and click OK. Do one or more of the following if you want to configure additional IP addresses: • • • • • • • • In the IP Settings tab, in IP addresses, click Add.
ZyXEL G-220 v2 User’s Guide • • Click Obtain DNS server address automatically if you do not know your DNS server IP address(es). If you know your DNS server IP address(es), click Use the following DNS server addresses, and type them in the Preferred DNS server and Alternate DNS server fields. If you have previously configured DNS servers, click Advanced and then the DNS tab to order them.
ZyXEL G-220 v2 User’s Guide Figure 74 Macintosh OS 8/9: Apple Menu 2 Select Ethernet built-in from the Connect via list. Figure 75 Macintosh OS 8/9: TCP/IP 3 For dynamically assigned settings, select Using DHCP Server from the Configure: list.
ZyXEL G-220 v2 User’s Guide 4 For statically assigned settings, do the following: • • • • From the Configure box, select Manually. Type your IP address in the IP Address box. Type your subnet mask in the Subnet mask box. Type the IP address of your ZyXEL G-220 v2 in the Router address box. 5 Close the TCP/IP Control Panel. 6 Click Save if prompted, to save changes to your configuration. 7 Turn on your ZyXEL G-220 v2 and restart your computer (if prompted).
ZyXEL G-220 v2 User’s Guide Figure 77 Macintosh OS X: Network 4 For statically assigned settings, do the following: • • • • From the Configure box, select Manually. Type your IP address in the IP Address box. Type your subnet mask in the Subnet mask box. Type the IP address of your ZyXEL G-220 v2 in the Router address box. 5 Click Apply Now and close the window. 6 Turn on your ZyXEL G-220 v2 and restart your computer (if prompted). Verifying Settings Check your TCP/IP properties in the Network window.
ZyXEL G-220 v2 User’s Guide 106 Appendix F Setting up Your Computer’s IP Address
ZyXEL G-220 v2 User’s Guide Index A D About 59 about your ZyXEL G-220 v2 19 access point (AP) 19 Access point mode 21, 25 access point mode 21, 36, 53 additional setup requirements 53 configuration 53 activating a profile 49 Adapter 50 Ad-Hoc 20, 47 Advanced Encryption Standard 29, 91 advanced settings 50 antenna 19 antenna gain 55 antenna output power 54 antenna power output 65 authentication 56 authentication method auto 31 open system 31 shared key 31 auto authentication 31 data encryption 38 dBm 55
ZyXEL G-220 v2 User’s Guide I IEEE 802.
ZyXEL G-220 v2 User’s Guide Support E-mail 7 Sweden, Contact Information 8 syntax conventions 17 T Telephone 7 Temporal Key Integrity Protocol 29 Temporal Key Integrity Protocol (TKIP) 91 TKIP 29 transmission rate 36, 46, 50, 54, 65 transmission rate (Tx Rate) 27 transmit key 39 Trend Chart 36 troubleshooting 63 AP connection 63 link status 64 network communication 64 starting ZyXEL Utility 63 U uninstalling ZyXEL Utility 59 upgrading ZyXEL Utility 60 important step 60 User Authentication 29, 92 introdu
