Azel Technologies Digital Non-Programmable Heat Only Radiant Floor Thermostat with 10 Ft. Floor Sensor

D-26FS digital thermostat is specifically designed for Radiant Floor Heating Systems. It is very simple to install and operate without any programming steps. A 10 ft. auxiliary remote sensor is provided to measure and control the slab temperature. In addition, an ON/OFF switch can be used to turn off the relay output. Setpoint and floor temperature or room temperature is displayed on the LCD screen with backlit. Features: Large LCD with backlighting for displaying Setpoint & Floor Temperature or Room Temperature Slab Temperature Control for Radiant Floor Heating Systems Low Voltage (24 VAC) System Reliable Digital Electronic Accuracy No Leveling Required Contains NO Mercury, environmentally safe Only 2 wires needed to power thermostat, no need to change battery in the future Selectable display in °F or °C EEPROM for setting backup ON/OFF switch to shut off relay output Supplied with 10 ft. floor sensor Built-in Digital Control System