Bender isoCHA425-D4-4 eMobility insulation monitor

The ISOMETER® is used for DC charging stations according to the Japanese CHAdeMO charging standard for voltages between 50 V DC and 400 V. Single-pole insulation faults are reported with a response time of ≤ 1 second. Two-pole insulation fault within 10 seconds. The maximum permissible mains leakage capacity CE is 2 μF. Individual parameterization means that adaptation to the plant and operating conditions must always be carried out on site in order to meet the requirements of the standards. Observe the limits of the application area specified in the technical data. Any other use or use beyond this is considered to be improper DC charging stations for electric vehicles according to the Japanese charging standard CHAdeMO The ISOMETER® measures the effective value (TrueRMS) of the mains voltage UN between L+ and Las well as the DC voltages between L+ and earth (UL+e) and between L- and earth (UL-e). It determines the fault location "R%", i.e. the distribution of the insulation resistance between the L+ and L...