Berta 2.58 in. x 2 in. 105-Degree Nickel Half Overlay Self Closing Frameless Hinge (60-Pack)

Frameless Cabinet Hinge with plate Hinge is made from steel and nickel plated. Hinge cup drilled in the back of the door is 35 mm Dia (1-3/8 in.). Door opening angle is 105°. Hinge allows adjustments after installation Hinge cup drilled in the back of the door is 35 mm Dia (1-3/8 in.). Door opening angle is 105°. Hinge allows adjustments after installation This hinge may be used to retrofit existing cabinets. Simply detach your existing hinges from the cabinets, replace the hinges using the existing screws. Half Overlay ADVISORY: This hinge requires that the cup drilled in the back of your door is at least 13 mm D (1/2 in.). Top hinges required a 12.5 mm cup depth. We recommend that you measure the cup depth on your doors before ordering. Many cabinet makers used a 13 mm cup depth even though the requirement was only 12.5 mm so yours may actually already be drilled to 13 mm. Each hinge uses 4 each #6 flat head screws (not included but offered for purchase during checkout). Hinge is made from steel and nick...