C&D Valve 1/4" Flare Copper Access Tee on 1/4" OD x 3" Copper Tube w/ 1/4" Flare Brass Wrench Cap & Valve Core (2 Pack)

Copper Tees allow connection at each end and require less solder than silver solder, such as 95-5. Copper Tees are preferable where two line ends have not yet been attached or where it is desirable to cut a line rather than drive a hole in an uncharged system. Copper Tees can save time and money. Features: Tee with 1/4" m. flare access saddled on 1/4" OD x 3" copper tube, swaged on one end CD2250 brass wrench cap and valve core Install Instructions: 1. Remove cap and valve core 2. Clean tubing and apply flux 3. Insert tubing into each end and braze into place 4. Replace valve core, tighten, evacuate and charge system 5. Install cap when work is complete