DECA Semi-automatic welding

A feature of the three-phase semi-automatic welding and welding soldering DECA D-MIG 530 T is the ability to work simultaneously with two soldering irons, which are equipped with Euro connectors for optimal operation in argon or carbon dioxide (Mig / Mag), as well as the No Gas mode DECA D-MIG 530 T works on direct current. At 60% of its power consumption is 4.5 kW, which provides a voltage on a 30 V arc. The strength of the current is adjustable in the range of 20-220 A. For welding of different types of metal, the following wire types are used: steel 0.6 - 1 mm; aluminum 0.8-1 mm, stainless steel 0.8-1 mm The welding semiautomatic device can use various types of Cu Si3 / Cu Al wire (MIG BRAZING) for welding HSS, EHS, UHS and BORO STEEL, aluminum, Mg / Si Also the welding semiautomatic device is protected from overload and reinforced forced ventilation system. The equipment operates in the following cycles: 180A @ 50% 160A @ 60% 125A @ 100% DECA D-MIG 530 T after setting the settings and shutting down the...