DECA Semi-automatic welding

Automatic welding machine DECA STARTWIN 135E performs welding work on aluminum and steel in a protective, inert, active gas environment (Mig / Mag) using any type of wire, including flux-cored (self-protective wire 0.9 mm in a coil 200 g) Works in - No Gas mode The power consumption of the equipment at 60% - 1.5 kW, the no-load voltage of 30 V DECA STARTWIN 135E is equipped with current control within 30-120 A and can operate in 4 modes Duty cycles that are supported by the welding semi-automatic DECA STARTWIN 135E, the following - (105A @ 15%) - (70А @ 35%) - (50А @ 60%) The device is equipped with 16A A fuse for welding. For welding metals with different characteristics, the following wire diameter is used: steel 0.6-0.8 mm; aluminum 0.8 mm, stainless steel 0.8 mm The equipment is equipped with enhanced forced ventilation system