Digilent Digilent JTAG-SMT3-NC Programming Module w/ UART interface (MSL 6)

The Digilent JTAG-SMT3-NC Programming Module w/ UART interface (MSL 6) uses a 3.3V main power supply and independent Vref supplies to drive the JTAG and UART signals. All JTAG signals use high speed 24mA three-state buffers that allow signal voltages from 1.8V to 5.5V, and bus speeds up to 30MBit/sec. All UART signals use high-speed 24mA buffers that allow signal voltages from 1.8V to 5.5V and bus speeds up to 12Mbaud. JTAG debugging solution for Xilinx FPGAs with UART side channel; USB 2.0 port that can...