Exeltech Exeltech XP1100 12-volt 1100 watt sine wave inverter

Model: XP-1100 / 12VDC. Made in the U.S.A. These inverters are capable of exceeding their rated power by 10% for a limited time. The inverter's capability at this level is primarily dependent upon temperature. If output power is exceeded, output voltage is reduced to a level which will provide the inverter's rated power to the load by clipping tops of the waveform. The inverter can operate safely in this mode indefinitely. Should the overload condition clear, the inverter will again provide the cleanest Sine Wave in the industry. Positive (+) and Negative (-) input terminals are 5/16" studs with brass hardware. They are accessed under the Rear Cover. Exeltech’s XP series inverters provide the cleanest, best regulated sine wave output over the widest DC input of any inverter on the market today. They are extremely low in Total Distortion—specified to 2%, and typically better than 1.5%. Total Harmonic Distortion is typically 0.8% to 0.9%. Remaining distortion is a result of residual switching noise, which am...