Fluke Multifunction process calibrator 24mA 15kHz 4kOhm

Measure and source volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters. Two separate channels; measure, source and view process signals simultaneously. Measure pressure using any of 29 Fluke 700Pxx Pressure Modules (for pressure sourcing external pump required). Power transmitters during test using 24 V loop supply and simultaneous mA measurement. Precise measurement and calibration source performance, accuracy of 0.01% in Range 4...20 mA. Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis. Store frequently-used test setups for later use. Integrated pressure switch test allows you to capture the set, reset and deadband of a switch. HART mode inserts 250 Ohm resistor in mA measure and source for compatibility with HART instrumentation.