Honeywell Electronic Pneumatic Transducer w/ direct action and 2 to 10 vdc input signal (no cover)

Electronic-Pneumatic Transducers are used in electronic-pneumatic control systems to convert a proportional electric output signal from a controller into a direct-acting, proportional pneumatic signal. Features Screw mounting or snap rail (models with cover). Factory calibrated. Dual barb fittings. High accuracy. Specifications Application: Electric to pneumatic Transducer Maximum Safe Operating Pressure (psi): 30 psi Output Pressure Range: 3 to 15 psi Connections: Dual barb-fittings for 1/4 in. or 5/32 in. O.D. plastic tubing Airflow Usage: 0.025 scfm (117mL/s) Max. Operating Temperature: 131 F Input Signal: 2 to 10 Vdc Normal High End Pressure: 16 psi with 18 psi main pressure at 12 Vdc or 16 psi at 11 Vdc ( min. ) Normal Low End Pressure: 0.5 psi at 0 Vdc Pressure Range: 0 to 18 psi Voltage: Powered by Control signal Humidity Range: 5 to 95% RH Comments: Without cover, without internal power supply for panel mounting (2 wire)