Joy-it Humidity sensor 1 pc(s)

The Prong soil moisture sensor for BBC microbit is a sensor board that can be mounted directly on a BBC micro:bit to monitor the moisture in the ground. The two conductive tines are inserted into the ground. Any water or moisture in the ground will lead to an analogue voltage that can be read by the BBC micro:bit.Prong is powered by the BBC micro:bit's 3V power supply. Use either the USB or JST port on the BBC micro:bit to power the circuit. The board is designed in such a way that the BBC micro:bit can be screwed down with 3 x M3 nuts and 3 x M3 screws. Insert the screws through the P1, 3V and GND holes of the board and the BBC micro:bit and then secure them with the M3 nuts on the back of the BBC micro:bit. Alternatively, Croc clips can be used to connect the Prong to the BBC micro:bit.If it is attached to the Prong Moisture Sensor, the micro:bit can be coded through any of the micro:bit editors, such as the Microsoft MakeCode Editor. This text is machine translated.