Joy-it Stepper motor amplifier Joy-it

Stepper motors end stage - Prepared for the Pokeys 57 CNC control [by IDC Connector] by means of cable connection to any CNC control can be used - - 0.5 to 2.5A phase current Power simply via jumper can be set - Compatible with 4, 6 or 8-cable stepper motors with any voltage - +10 VDC to +30 VDC power supply 1, 2, 4, 8, 16 and 32 micro-step per step adjustable - "Mixed decay mode" for a softly more run of the Stepper Motors - 3.3V and 5V logic compatible inputs - 250 KHz maximum step rate - Can be used for 0°C to 70°C ambient temperature. LEDs: Power, error message and "Enable" indicator Heat sink on output IC - Small dimensions: 50 mm x 52 mm This text is machine translated.