KMC Controls Universal Analog Electronic VAV Flow Controller-Actuator w/ CW/Close, 100° Rotation, No Sensor
CEP-4995
Categories
Description
The analog electronic CEP-4000 series pressure-independent controller-actuators are designed primarily for use on variable air volume terminal units. Cooling and heating air flow is sensed by a temperature-compensated hot-wire anemometer. Velocity sensing is unaffected by changes in the duct air temperature. The CEP-4000 series offers full-range flow control of VAV terminal units when used with the CTE-1000/1100/5000 series as well as the CTE-5202 room thermostats. Air-velocity flow control limits are set at the room thermostat or remotely with the REE-1012 remote-limits accessory module. The actuator section provides a magnetic clutch that allows the actuator to be stalled at either end of stroke, eliminating the requirement for mechanical stops or end switches. The controller-actuator is available with 100° or 60° built-in stops. The default rotation direction can easily be reversed by swapping the red and blue motor wires. When replacing an older model, the CEP-4995 (100° rotation, CW to close, no senso...
Manuals
# | Title | Languages | Pages | Updated |
---|---|---|---|---|
1 | Application Guide | EN | 22 | 2022-03-23 |
2 | Install Instructions | EN | 4 | 2022-03-23 |
3 | Product Overview | EN | 2 | 2022-03-23 |