LDT Littfinski Daten Technik

M-DEC is a 4x decoder with automatic learning decoder address. They confirm only the M-DEC programming key and afterwards a key on the switch control desk and gives a switching command via a PC with attached interface. The decoder address is thus adjusted The decoder address is permanently stored, however you can change it at any time by pressing the programming key It couldn’t be simpler: Since the procedure time of the motor driving amounts to only few seconds, each output is automatically switched again without voltage after 10 seconds. This protects against defective limit switch in the drive. Simple and secure connection of voltage supply and the switch engines via screw clamp. No further additional circuits or wirings are required, as this is the case for example while using switch decoders with bi-stable relays The engine circuits are connected directly with the decoder. The decoder keeps the current direct either from the digital electric circuit or via its separate input of the AC Voltage output (...