MAC Magnetism Detector

The Magnetic Analysis Magnetism Detector is widely used by steel suppliers and fabricators to indicate the degree and polarity of residual magnetism in ferrous products. THIS UNIT IS NOT INTENDED TO MEASURE THE STRENGTH OF RESIDUAL FIELDS, NOT MAGNETS. ATTEMPTING TO MEASURE FIELDS SIGNIFICANTLY STRONGER THAN 20 GAUSS MAY DAMAGE THE UNIT. Easy to use, simply place the base of the indicating needle against the object you are testing. The needle indicator will move to a point on the scale that represents the strength of the magnetic field of the material (in gauss). The meter scale reads 20 units on either side of a zero center point, allowing for quick identification of the field’s polarity as well as the level of the magnetic field. Full scale deflection is equal to approximately twenty gauss. When checking magnetized bar stock or tubing, a reading of 10 or less is usually acceptable. Each piece should be tested separately, so that the reading is not affected by adjacent parts. Sensitivity & Calibration Mag...