MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch DSTIKE NodeMCU ESP8266 Programmable Development Board Built in 500mAh Battery with OLED Dispaly, Wristband and 3D Printing Case

What is it? Deauther Watch is an ESP8266 development board, but you can wear it like a smartwatch. This ESP8266 development board comes with a 500mAh lithium battery, OLED display and a 3-way momentary slide switch. It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks. You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board. Note: Only support 2.4GHz DSTIKE Deauther Watch and ESP32 Watch share the same screen board, but pinmap and breakout pads are different! What makes it special? Only ~80mA power usage Up to around 7 hours work time 200 mA charging current Indicate charging LED (Red means charging, off means full) Included 8dB antenna and 2dB antenna Power Switch (Strongly recommend turn it off when charging) Protection: short, overcharging, over discharging, temperature GPIOs and Hardware Info: Display: SH1106 1.3" OLED Display SDA: GPIO 5 (D1) Display SCL/SCK...