Makita Cordless stud cutter M12

(This text is machine translated) For cutting rebar up to 12 mm in diameter, this tool is the best solution. The cutter has a special design that does not damage the thread of the stud, makes clean cuts without chips. The tool is equipped with a check valve that allows the plunger to be returned to its original position when it is blocked or when it is impossible to complete the cut. The cutter is very easy to use: to start the cutting process, press the trigger switch. The cutting rod will extend to the frontmost position. After the trigger switch is released, the cutting bar will automatically return to its original position. The battery charge level is easy to check by pressing the dedicated button on the battery pack. The indicators will light up for a few seconds. The tool has an ergonomic design and is equipped with a flashlight for use in areas with poor lighting. The tool is equipped with a BLDC(Brushless Direct Current) brushless DC motor. Compared to brushed counterparts, it has high speed and dy...