PowerBox

Sensor Electronic Switch Backer

Categories

Description

PowerBox Sensor Electronic Switch Backer for operating / control board with three push-buttons and three power indicator LEDs. Connectors for two batteries and two receiver leads, all contacts gold-plated, all wiring 0.34 mm? Compact, space-saving design, large cooling surfaces for reliable operation. Applicable for small and medium-sized model aircraft with 6~7 standard size servos, or upto 10 servos in gliders with wingspan up to about 5.0 meters. Model helicopters with a maximum rotor diameter of 1.5m and upto 6 servos, Also for all types of boat and ignition systems for four-cylinder petrol engines with dual ignition systems. Specification: Power handling up to 5.0 Amps (according to heatsink) For 7.4 Volt LiPo batteries (PowerBox Battery) or 5 NC or NiMH cells Two independent linear voltage regulators, supplying 5.90 Volts Two independent electronic switches Two volt controller ( in 4 steps ) for each battery NEW Two Low voltage memory for both batteries NEW SET button for On / Off switching protectio...

Manuals

#TitleLanguagesPagesUpdated
1User ManualEN82019-03-27