SES Flexcharge Flexcharge Realtime Programmable Timer

This controller will directly control both AC and DC loads up to 16 amps non-inductive (lights, heaters etc.) or 8 amp inductive loads (motors, pumps, fans, etc.). Will control up to 240 volt AC or DC (but not recommended for over 48 volts DC). This requires a 12 volt battery to operate the timer and internal relay. The timer draws only a few milliamps, so can operate from one side of a 24 volt battery system without battery damage, or for remote pump systems you can use one of the small Concorde 33 Amp-hour batteries with a small trickle charge panel and Sunguard controller, or often you can tap off the existing pumping panels with a charge controller to feed a 12 volt battery. Since it draws only a very tiny current, it will not affect pump operation even if charging the battery at the same time. The Flexcharge Real Time Programmable Timer is a 12 hr, 8 event, clock based programmable 8A load controller. Multiple Load ON and OFF times are programmed into this real time clock controller. Each day can be p...