SharkBite Brass Connector Kit

25562Z

Categories

Description

The SharkBite water filtration installation kit has everything you need to quickly install your new filtration system; it is simple and fast and does not require any soldering or gluing. The kit includes a SharkBite 1-in slip male adapter, a SharkBite 1-in male adapter, and a 1-in disconnect clip. Apply thread tape to the male adapter, thread into the inlet or outlet side of filtration unit, and thread the slip adapter on the opposite side. Push the slip end on first and use the disconnect tool to slip fitting back onto other end of pipe completing the connection. With SharkBite fittings, you can install wet or dry so no more waiting on the lines to dry out to glue or solder, and you can turn the water back on immediately after making connection. Lead free DZR brass construction for durability and reliability Male slip fitting compatible with copper or CPVC, male adapter compatible with copper, PEX, CPVC or PE-RT Rated to 200 degrees Fahrenheit and 200 PSI Innovative push-to-connect design makes for quick...

Manuals

#TitleLanguagesPagesUpdated
1CA Prop 65ES12020-10-04
2Warranty GuideEN22019-05-17