Sparkfun Electronics SparkFun Qwiic Adapter

The SparkFun Qwiic Adapter will help you make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device. Can be used to convert an old I2C-enabled device into a Qwiic-enabled board; Two Qwiic connection ports all on the same I2C bus; 1mm pitch, 4-pin JST connector; Four plated through holes are broken out for SCL, SDA, 3.3V and GND