Systemair DVV/T 1000D6+REV 380V/60Hz IE3 - Centrifugal roof fan, 120°C continuous, vertical discharge

Motor outside of the air stream Vertical exhaust of media up to 120°C permanently Suitable for coastal applications Wide range of accessories IE2 single speed (rsp. IE1 8 pole) motor inside PTC thermal protection serial built-in motor Sucking side connection acc. EUROVENT Octagonal casing is manufactured from seawater resistant aluminium. The base frame consists of hot-dip galvanised steel. Impeller with backward-curved blades is manufactured from steel and galvanized. Motor cooling with fresh air via air duct. The motor protection is provided by customers. Service switch serial on cooling duct. For speed control of single speed motors use combination of frequency inverter and appropriate filter to motor side (sine or du/dt), respectively observe instructions. At frequency controlled units additional EMC protection could be needed (on request). The motors cannot be voltage controlled.