TDK-Lambda 19" bench PSU (adjustable voltage) 0 - 40 V DC 0 - 85 A 3.4 kW 1 x programmable

The 3.3 kW Model for 3 phases is only 2HE flat (88 mm height) and can also be stacked directly, and requires no air slot above or below. Output voltages till 40 V and Output currents up to 85 A can be set directly on the device or remotely using built-in RS232/RS485. All important functions can get programmed over the analogue inputs (control voltage 0 - 5 V, 0 - 10 V or external resistance, for example, digital control of LabView and LabWindows drivers are appropriate). High-resolution 16-bit A/D and D/A converters enable very precise settings and programming; the dial controls on the device can be switched between coarse and fine adjustment. A dual digital display shows the current values as well as various state information (amongst othersover Voltage Protection, Under Voltage Limit, over load mode, address adjustment ) , and a monitor output provides corresponding analogue voltages (0 - 5 V or 0 - 10 V) for external monitoring The devices can naturally be operated as a constant voltage as well as a con...