TDK-Lambda 19" bench PSU (adjustable voltage) 0 - 600 V DC 0 - 5.5 A 3.3 kW 1 x programmable

The 3.3 kW model is only 2HE flat (88 mm height) and can also be stacked on top of one another directly, so requires no air slit above or below. Output voltages upto 600 V and output current upto 5.5 A can be adjusted directly at the equipment or remote controlled by means of inserted RS232/RS485-interface. About analogue inputs all important functions can be programmed (control voltage 0 5 V, 0 10 V or over external resistance; for the digital control e.g. over LabView® and LabWindows® appropriate drivers are available). High-resolution 16-bit A/D and D/A converters enable very precise settings and programming; the dial controls on the device can be switched between coarse and fine adjustment. A dual digital display shows the current values, and various status information (andOver Voltage Protection, Under Voltage Limit, overload mode, address settings again), and a monitor output provides corresponding analog voltages (0 - 5 V or 0 - 10 V) for an external monitoring The devices can naturally be operated ...