Turnigy Accucel-6 80W 10A 1~6S Balancer/Charger (Suitable for LiHV)

The Turnigy Accucel 6 Balance Charger utilizes quality FET's and resistors to accurately balance and charge LiPoly, LiFe, LiHV, NiMH, NiCd and Pb batteries. If you are looking for a charger for your Bolt or any other LiHV batteries this unit is perfect as a low cost solution. The Accucel-6 will handle LiHV/LiPoly/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage throughout the charge cycle. The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately. The Accucel-6 is a DC only input charger, it requires a DC input of between 11~18V which can be supplied from either a battery or an AC mains power supply. On the power input side it uses the popular XT60 (male) connector so if you wish you can power it on the field using a large capacity lipoly pack with XT60 connector, no need for adapters or lugging a heavy 12V car battery about. Other connections are a series of JST-XH balance connector ports for 2~6S, temperature sensor port (sensor ...