Unbranded

This attractive robot arm is the ideal introduction to robotics. Built from strong pressed 3mm aluminum, the arm is robust and stable on its supplied base when screwed to your chosen surface or if stuck with the supplied sticky pads. The six servos provide individual control of the gripper that moves from 0 to 37mm fully open, wrist-rotates through 120 degrees, wrist-bends to 100 degrees, elbow to 100 degrees, shoulder to 100 degrees and waist joint that rotates to 100 degrees. It will not give you full 360 degree movement, but you can pick up from one side and set down on the other. A combination of movements gives this arm great dexterity. It has six DGServo's, four S06NF MG STD servos and two S05NF MG STD servos for the gripper, these are pre-installed and fitted with Futaba style servo plugs. Fully extended, the arm is 365mm long and the servo wires are 680mm long, measured from the base of the arm. The maximum reach of the arm when in use is 300mm and at full reach it will lift a little over 100g. Inc...