Uponor TruFLOW Manifold, 4-loop S&R

Note: This manifold requires 8 Loop Fitting Assemblies (please see below). TrueFLOW Manifold without Flow/Temperature Meters come fully assembled ready for installation. The TruFLOW balancing Hex Key is used on the internal balancing valves of the supply manifold to balance the loops across the manifold. Manifold is shipped with the appropriate number of Actuator Adapters (A2630028). Maximum recommended flow to the manifold based on manifold body diameter is 21.0 gpm. Note: The Flow Meters (A2640015 and A2640027) are purchased separately and installed on the return manifold. This manifold requires (8) Loop Fitting Assemblies. PEX Loop Fitting Assemblies Options PEX Compression Loop Fitting Assemblies A4020313: 5/16" PEX to R20 Loop Fitting Assembly This fitting will connect 5/16" PEX to a loop of the Manifold without requiring the use of a PEX Tool. A4020375: 3/8" PEX to R20 Loop Fitting Assembly This fitting will connect 3/8" PEX to a loop of the Manifold without requiring the use of a PEX Tool. A4020500:...