UTOOL Milling machine UWSM-55T 220 V

The UTOOL UWSM-55M milling machine has a high-quality motor with a power consumption of 2.800 W, which causes the spindle to move at an amazingly high speed - up to 9,000 rpm. 3.000, 6.000, 9.000 rpm Also, the design provides for an exhaust nipple with a diameter of 100 mm, which allows you to connect a special exhaust unit. The spindle tilt is adjustable from -5 ° to + 30 °, this function is significantly packaged Ostit work for the operator. The spindle stroke is 105 mm, which only indicates the enormous potential of this model. The milling machine is used for high-quality milling of a wide variety of products. slots This machine is the ideal solution for small workshops specializing in wood processing. Cast-iron table, high-quality polished and polished Carriage for milling parts at different angles from 0 ° to 45 ° in both directions. Convenient change of spindle speed from 1.800 to 9.000 rpm. Rubber shaft with abrasive bushing 100 mm high and 76 mm in diameter for grinding parts. It is possible to rot...