Vanner Inverter/Charger, 230V 50Hz 1050 Watt w/ HWR

There are four basic models available. The hardwired units (models with H suffix on the P/N) have 3 wires (black for hot, white for neutral, green for GND) used to connect the AC input of the inverter/charger to the AC input power with wire nuts, and 3 similar wires with wire nuts to connect the AC output of the inverter/charger to its AC load center. Models with G suffix on the P/N have an AC line cord installed at the factory for connecting to AC input power and a receptacle with a GFCI (Ground Fault Circuit Interrupter) for plugging AC loads directly into the inverter. This model requires no wiring by the customer on the AC side of the inverter. Bravo is a high performance combination inverter and battery charger. The inverter is connected to a battery through proper fusing and can also be connected to AC input power. Loads connected to Bravo will be powered from the battery when AC input power is not available. When AC input power is restored (after a brief delay to ensure that full power is available)...