Victron Energy Blue-Solar PWM-LCD&USB Charge controller PWM 12 V, 24 V 20 A

Liquid crystal screen For status monitoring and for set-up Load output Overloading the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads if the battery has been discharged to a specified voltage value. Some loads (especially inverters) can best be connected directly to the battery. The inverter remote control can best be connected to the load output. A special interface cable may be required, please refer to the manual. The voltage values for connecting and disconnecting can be set. Day/night time setting of the load output This option allows you to set a certain TIME AFTER sunset. Programmable battery charging algorithm Pre-programd algorithms for AGM, GEL, liquid electrolyte or LiFePO4 batteries (only with integrated BMS) Two 5 V USB outputs Maximum current (both outputs together): 2 A. This text is machine translated.