Victron BlueSolar PWM-LCD&USB 48V-20A Charge Controller

Liquid crystal display: For status monitoring and set-up Load output: Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable. Day/night timing of the load output: This option allows for a pre-set ON-time after dusk. Programmable battery charge algorithm: Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only) Two 5 Volt USB outputs: Maximum current (both outputs combined): 2A Please Note: The image shown is not the correct image for this model.