ZTW Air Programming Card (Beatles & Shark) G2

(This text is machine translated) Air Programming Card (Beatles & Shark) Key Features Effortless ESC parameter adjustment. LiPo battery voltage checker. Real-time display of voltage, current, input throttle, output throttle, RPM, etc. PWM throttle signal detection. ESC / servo tester Software updates via mobile app and Bluetooth module. What's in the box 1x LCD program unit. 1x program manager. 1x complete instruction sheet. How to use your air programming card? 1. Connect your board to the motor 2. Set the blue switches on your programming board to the desired settings (see your ESC instructions for details on options) 3. Plug in the cable signal to the programming card connector marked "- + P". 4. Connect the ESC to the batteries. For an ESC without a BEC (voltage regulator) already included, you must connect the extra current (4.8 - 6.0V) or your UBEC to the connector marked "-+". 5. You should hear a short "Beep" to confirm that your settings are valid and saved. If you hear a long "Beep" (about 10 sec...