Installation guide

4-12 BEA Products Installation Guide
directory, see “Choosing a BEA Home Directory” on page 1-12.
The installation program displays the following prompt:
Choose BEA Home Directory:
1| /home/bea
2| /home1/beahome2Enter index number to select OR [Exit][Previous][Next]
Press Enter to use the selected BEA Home directory or type the number of the BEA Home
directory that you want to select.
Whether you accept the selected BEA Home directory or specify a different BEA Home
directory, you are prompted to confirm your selection, as shown in the following sample:
Choose BEA Home Directory:
->1¦ Yes, Use this BEA home directory [/home/bea]
2¦ No, return to BEA home directory selection
Enter index number to select OR [Exit][Previous][Next]>
Type 1 or press Enter to accept your selection. Otherwise, type 2 to return to the Choose
BEA Home Directory panel where you can modify your entry.
After you select the appropriate BEA Home directory and confirm your selection, the
Confirm Product Directory panel is displayed.
7. The Confirm Product Directory panel indicates the folder in which the WebLogic Platform
software will be updated. For example:
Confirm Product Directory:
Product Installation Directory: [home/bea/weblogic92]
Files in /home/bea/weblogic92 will now be upgraded to the 9.2.x.0
maintenance level.
Enter [Exit][Previous][Next]>Press Enter or type next to continue. The
following text is displayed:
8. After you confirm the product directory, the installation program makes a backup copy of
specific files from the previous installation and then installs new versions of those files.
When the installation is complete, the following prompt is displayed:
Install CompleteCongratulations! WebLogic Platform 9.2.x.0 has been
successfully installed to/home/bea/weblogic92
Press any key to continue OR [Exit]>
9. Press any key to exit the installation program.