Microcontrollers Debugger Manual

How To...
How to Work on the Register
211 Microcontrollers Debugger Manual
Start Memory Dump at Address Where
Register is Pointing
The Debugger provides two ways to dump memory starting at the address to which a
register points.
Using Drag and Drop
• Drag a register from the Register component to Memory component.
Choose Address
Figure 6.5 Memory menu Display Address
1. Right-click in the Memory component to display the Memory context menu.
2. Choose Address from the context menu to open the Memory dialog box shown in
Figure 6.5
.
3. Enter the register content in the Edit Box and choose OK to close the dialog box.
The memory component scrolls until it reaches the address stored in the register. This
feature allows you to display a memory dump from the application stack.
NOTE If Hex Format is checked, numbers and letters are considered to be
hexadecimal numbers. Otherwise, type expressions and prefix Hex numbers
with 0x or $.