HP 3PAR OS 3.1.3 Command Line Interface Reference

Select the end time in seconds for the report. If -attime is specified, select the time for the report.
The value can be specified as either:
• The absolute epoch time (for example 1351263600).
• The absolute time as a text string in one of the following formats:
Full time string including time zone: "2012-10-26 11:00:00 PDT"◦
◦ Full time string excluding time zone: "2012-10-26 11:00:00"
◦ Date string: "2012-10-26" or 2012-10-26
◦ Time string: "11:00:00" or 11:00:00
• A negative number indicating the number of seconds before the current time. Instead of a
number representing seconds, <secs> can be specified with a suffix of m, h or d to represent
time in minutes (e.g. -30m), hours (e.g. -1.5h) or days (e.g. -7d).
If it is not specified then the report ends with the most recent sample.
-hires
Select high resolution samples (5 minute intervals) for the report. This is the default setting.
-hourly
Select hourly samples for the report.
-daily
Select daily samples for the report.
-groupby <groupby>[,<groupby>...]
For -attime reports, generate a separate row for <groupby> items. Each <groupby> must be
different and one of the following:
• PDID Physical disk ID
• CAGEID Cage ID
• CAGESIZE Cage size
• MAG Disk magazine number within the cage
• DISK Disk position within the magazine
• DISK_TYPE The disk type of the physical disk
• SPEED The disk speed
-disk_type <type>[,<type>...]
Limit the data to disks of the types specified.
• FC – Fibre Channel
• NL – Nearline
• SSD – Solid State Drive
–sortcol <col> [,<dir>][:<col>[,<dir>]...]
Sorts command output based on the column number (<col>). Columns are numbered from left to
right, beginning with 0. At least one column must be specified. In addition, the direction of sorting
<dir> can be specified as follows:
inc
Sort in increasing order (default).
dec
Sort in decreasing order.
548 System Reporter (SR) commands