Using HP Insight Software from a Highly Available Central Management Server with Microsoft Cluster Service

16
Figure 5. Adjusting the data source name on the primary system
Adding the Insight software cluster resources
To complete the installation of HP ICM to the cluster, several cluster resources must be created using
Cluster Administrator. This can be accomplished by either running the HA-VSE configuration scripts
or by following the next steps.
Naming Insight software resource groups
1. Power the primary system on, and log in to Windows as Administrator.
2. Power the secondary system on.
3. Open the Cluster administrator tool from the primary system and confirm that the primary system
owns all the cluster resources. Ensure that the Cluster Service is running on the secondary system
(select the Start Cluster Service menu option if it is not running).
4. In the Cluster Administrator window, create a new cluster group, using CTRL-G or File, New,
Group. Enter the name of the group, e.g., “HA-VSE Group”. Click Next and add from the list of
available nodes, the preferred owner(s). Click Finish. Figure 6 shows the result.