HP VPN Firewall Appliances Network Management Configuration Guide

249
Figure 166 Modifying VLAN configuration
3. Configure a security zone for interface GigabitEthernet 0/1 and VLAN 10. (Details not shown.)
4. Create VLAN-interface 10, and assign an IP address to it:
a. From the navigation tree, select Device Management > Interface.
b. Click Add.
c. Set the interface name to Vlan-interface 10, select Static Address for IP Config, enter
192.168.1.2 for IP Address, and enter 24(255.255.255.0) for Mask.
d. Click Apply.
Figure 167 Creating an interface
5. Create a static ARP entry:
a. From the navigation tree, select Firewall > ARP Management > ARP Table.
b. Click Add.