HP VPN Firewall Appliances Network Management Configuration Guide

412
--- 10.4.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms
OSPF route redistribution configuration example
Network requirements
• Enable OSPF on all the routers.
• Split the AS into three areas.
• Configure Router A and Router B as ABRs.
• Configure Firewall as an ASBR to redistribute external routes (static routes).
Figure 271 Network diagram
Configuration procedure
1. Configure IP addresses for interfaces. (Details not shown.)
2. Configure basic OSPF (see "Basic OSPF configuration example").
3. Configure OSPF to redistribute routes:
# On Firewall, configur
e a static route destined for network 3.1.2.0/24.
<Firewall> system-view
[Firewall] ip route-static 3.1.2.1 24 10.4.1.2
# On Firewall, configure OSPF to redistribute the static route.
[Firewall] ospf 1
[Firewall-ospf-1] import-route static
4. Verify the configuration:
# Display ABR/ASBR information on Router C.
<RouterC> display ospf abr-asbr
OSPF Process 1 with Router ID 10.5.1.1
Routing Table to ABR and ASBR
Type Destination Area Cost Nexthop RtType
Intra 10.3.1.1 0.0.0.2 10 10.3.1.1 ABR