HP VPN Firewall Appliances Network Management Configuration Guide

720
Prefix Type Pool Expiration time
2001:410:201::/48 Static(C) 1 Jul 10 2011 19:45:01
2001:410::/48 Auto(C) 1 Jul 10 2011 20:44:05
IPv6 address and configuration parameters assignment
configuration example
Network requirements
As shown in Figure 374, the firewall at 1::1/64 serves as a DHCPv6 server, and assigns IPv6 addresses,
DNS server address, domain name suffix, SIP server address, and SIP server domain name to DHCPv6
clients.
The firewall assigns address 12:34:56::A/48 to the client with the DUID 00030001CA0006A40000,
and assigns addresses from the subnet 12:34:56::/48 (excluding 12:34:56::A/48) to other clients.
The DNS server address is 2:2::3. The domain name suffix aaa.com. The SIP server address is 2:2::4,
and the domain name of the SIP server is bbb.com.
Configuration considerations
• Enable IPv6 and DHCPv6 server.
• Create a static DHCPv6 option group and configure configuration parameters in the group.
• Create and configure an address pool.
Create a static binding so that the server can assign the specific address to the specified client.
Specify a subnet 12:34:56::/48 for dynamic assignment. Apply the DHCPv6 option group to the
address pool.
• Enable the DHCPv6 server on the interface that connects to the clients.
Figure 374 Network diagram
Configuration procedure
# Enable IPv6 and the DHCPv6 server.
<Firewall> system-view
[Firewall] ipv6
[Firewall] ipv6 dhcp server enable
# Configure the IPv6 address of GigabitEthernet 0/1.
[Firewall] interface gigabitethernet 0/1
Firewall
DHCPv6 server
DHCPv6 client
GE0/1
12:34:56::1/48
DHCPv6 client