HP VPN Firewall Appliances Network Management Configuration Guide

828

IPv6 BGP basic configuration example

Network requirements

All devices in Figure 399 run IPv6 BGP. Between Router A and Router B is an EBGP connection. Router

B, Router C, and Firewall are fully meshed through IBGP connections.

Figure 399 Network diagram

Configuration procedure

1. Configure IPv6 addresses for interfaces. (Details not shown.)

2. Configure IBGP connections:

# Configure Router B.

<RouterB> system-view

[RouterB] ipv6

[RouterB] bgp 65009

[RouterB-bgp] router-id 2.2.2.2

[RouterB-bgp] ipv6-family

[RouterB-bgp-af-ipv6] peer 9:1::2 as-number 65009

[RouterB-bgp-af-ipv6] peer 9:3::2 as-number 65009

[RouterB-bgp-af-ipv6] quit

[RouterB-bgp] quit

# Configure Router C.

<RouterC> system-view

[RouterC] ipv6

[RouterC] bgp 65009

[RouterC-bgp] router-id 3.3.3.3

[RouterC-bgp] ipv6-family

[RouterC-bgp-af-ipv6] peer 9:3::1 as-number 65009

[RouterC-bgp-af-ipv6] peer 9:2::2 as-number 65009

[RouterC-bgp-af-ipv6] quit

[RouterC-bgp] quit

# Configure Firewall.

<Firewall> system-view

[Firewall] ipv6

[Firewall] bgp 65009

[Firewall-bgp] router-id 4.4.4.4

[Firewall-bgp] ipv6-family