HP VPN Firewall Appliances Network Management Configuration Guide

913
Ste
p
Command Remarks
3. Configure the MLD querier's
robustness variable.
robust-count robust-value
2 by default.
A higher robustness variable
makes the MLD querier more
robust but results in a longer IPv6
multicast group timeout time.
4. Configure the startup query
interval.
startup-query-interval interval
By default, the startup query
interval is one-quarter of the "MLD
query interval."
5. Configure the startup query
count.
startup-query-count value
By default, the startup query count
is the same as the MLD querier's
robustness variable.
6. Configure the MLD query
interval.
timer query interval 125 seconds by default.
7. Configure the maximum
response delay for MLD
general query messages.
max-response-time interval 10 seconds by default.
8. Configure the MLD last
listener query interval.
last-listener-query-interval interval
1 second by default.
9. Configure the MLD other
querier present interval.
timer other-querier-present
interval
By default, the other querier
present interval is determined by
the formula "Other querier present
interval (in seconds) = [ MLD query
interval ] × [ MLD querier's
robustness variable ] + [ maximum
response delay for MLD general
query ] / 2."
Configuring MLD query and response parameters on an interface
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure the MLD querier's
robustness variable.
mld robust-count robust-value
2 by default.
A higher robustness variable
makes the MLD querier more
robust but results in a longer IPv6
multicast group timeout time.
4. Configure the startup query
interval.
mld startup-query-interval interval
By default, the startup query
interval is one-quarter of the "MLD
query interval."
5. Configure the startup query
count.
mld startup-query-count value
By default, the startup query count
is the same as the MLD querier's
robustness variable.
6. Configure the MLD query
interval.
mld timer query interval 125 seconds by default.